- This hanging kit works for the AlorAir Sentinel HD35P, Sentinel HS35, Sentinel HD55, Sentinel HD55S, Sentinel HD55P , Sentinel HDi65S, Sentinel HD90/HDi90, Sentinel HDi100/HDi120 from the floor joists in your crawl space.
- This pack comes with 4 Ratchet Straps. Use the easy pulley mechanism and adjust the rope as per your desired height. Suspend the dehumidifier in a crawl space, basement or attic setting.
- It helps to reduce noise and vibration while the dehumidifier is operating when properly installed. No transfer of noise or vibration to the floor above and getting lower space back is comfortable. Also, it provides additional height for proper condensate drainage/removal.
- Easy to install, Adjustable straps allow the user to easily lower or remove the dehumidifier for cleaning or service when needed.
- The rope is made from braided polypropylene; this strong and durable material will not fray or rip. It can also hold up to 300 pounds of weight! The hooks are made of zinc-plated stainless steel.
9 reviews for ALORAIR Hanging Kits for Crawl Space & Basement Dehumidifiers, Easy Way to Raise and Lower dehumidifier, Helps reduce noise and vibration of the unit
Add a review
Related products
Sale!
Rachel –
Was easy to mount with only one person. If you have a helper, a cheaper mount would probably work fine too.
TOM –
I used this product to hand a dehumidifier in my crawl space. First of all, it’s a little overpriced for what you get. And my kit was missing instructions. Besides that, the kit is custom-made for the type of dehumidifier I needed to install (HD55), so it made the task much easier. This kit allows you to elevate the dehumidifier, which gets it out of the way and also allows for proper drainage.
Stanley B. –
Heavy duty but costs too much
Ronno –
Also had the ground wire install issue. You have to move it or in interferes with the mount. Or drill a hole in the bracket. This is essentially 4 ratchet straps and 2 metal brackets.
2 of the 4 eye bolts were crap. The pointy end was missing so they were too blunt to tap into the wood. So you have to deal with that too. If you can make both the ground wire fix and the eye bolt repair, you can just buy ratchet straps and bar stock and save $100.
3 stars for ease of levelling.
Rob –
My wife and I hung a dehumidifier in the crawl space in 15-20 minutes. It went together perfectly and consists of quality parts. Be patient and make sure the corner of your device with the drain is slightly lower than other corners and you’re good to go.
Mac –
Bought this hanging kit for the dehumidifier I purchased to go under my house and it is well worth the money, it is easy to install on the unit and hanging was very easy, all hardware is included.
The width between the hangar eye bolts is 16″ so it matches floor joist and a quick measurement from front to back to position the eye bolts that screw into the floor joist was all the brain work required.
Once I got the unit in position I simply lifted and pulled the rope ratchet, it takes going to all four corners one at the time if you do this solo, but no big deal and a breeze to level, literally a 30 minute job start to finish.
I have sloping dirt under my house and this hanging kit prevented me having to try and build up something level to place the dehumidifier on, I would strongly recommend this to anyone installing an AlorAir dehumidifier in a crawl space.
California Girl 14 –
Super easy to install with the dehumidifier. It allows the dehumidifier to hang between floor joists.
JP –
I wanted to get my Sentinel HD55 dehumidifier off the concrete blocks in my crawlspace to free up space. The instructions were clear and the installation was quite painless. The hooks and ratchets are solid. Would recommend.
Travis Newcamp –
Attached to our product with ease, and was very easy to level using the pulleys attached. I would definitely recommend to anyone!