- OPTIMAL SPACE UTILIZATION: Maximize your available floor space with the space-saving design of this fan-forced heater. Specifically designed for ceiling mounting & hard-wired installation, it offers a convenient solution to free up valuable floor space in crowded environments such as warehouses, garages, & storage areas. By securely mounting the heater to the ceiling, you can effectively heat a large area while keeping the floor clear for other activities. With a heating coverage of up to 1250 sq. ft., this heater ensures widespread warmth.
- ROBUST STEEL BUILD: Constructed with high-quality heavy gauge steel, the body of this commercial heater is built to withstand the challenging conditions of poorly insulated areas. Its durable steel construction ensures reliable performance even in environments with temperature fluctuations. By utilizing heavy gauge steel, this heater offers enhanced durability and longevity, making it a reliable heating solution for commercial spaces. Rest assured that this sturdy construction will withstand the demands of various working environments.
- PRECISE AIRFLOW CONTROL: Experience targeted heating with the adjustable louvers and variable mounting angle of this heater. The louvers allow you to direct the airflow precisely where it is needed most, ensuring efficient and effective heating. Whether you want to focus the heat towards a specific area or disperse it evenly throughout the room, this heater provides the flexibility to meet your heating preferences. The fan-forced design further aids in distributing the warmth throughout the space, maximizing the heating performance.
- USER-FRIENDLY OPERATION: Take control of your comfort with the convenient controls of this heater. The digital thermostat enables you to fine-tune the temperature to your desired level, ensuring optimal warmth in your space. With the help of the remote control, you can adjust the settings from a distance, allowing you to personalize your heating experience without having to get up or interrupt your activities. Experience the ease and convenience of managing your heater’s settings with user-friendly controls that put you in command.
- ENHANCED SAFETY FEATURES: Designed with your safety in mind, this ceiling mount heater is equipped with intelligent safety features for worry-free operation. The built-in sensor monitors the temperature and automatically shuts off the device if it detects overheating, providing reliable protection against potential hazards. The power indicator light conveniently illuminates when the unit is in use, giving you clear visual confirmation of its operational status. With these smart safety measures in place, you can enjoy the warmth and comfort.
8 reviews for Comfort Zone Hard-Wired Ceiling Mount Garage Space Heater with Remote, 7,500 Watt, 240 Volt, Fan-Forced, Overheat Protection, Digital Thermostat, 12-Hour Timer, Ideal for Garage…
Add a review
Related products
Sale!
Indoor Electric Space Heaters
Sale!
Indoor Electric Space Heaters
Sale!
Indoor Electric Space Heaters
BLACK+DECKER Portable Space Heater, 1500W Small Space Heater with Overheat Protection for Indoor Use
Sale!
Indoor Electric Space Heaters
David –
This works so well. Easy to use. And like the remote. Would be nice if connected to wifi
Christian gagnon –
chaufer un atelier ce produit est exellent !
Matthew Hastie –
all winter works great set low setting heating 600 sq feet
John M –
The Comfort Zone Electric Space Heater provides reliable heat output and effective temperature control and makes my garage shop a comfortable and functional space even in colder weather.
The heat output of this electric space heater is impressive. It quickly warms up the entire shop (it is about the size of a one car garage), creating a cozy environment for various activities. Whether I’m working on DIY projects, doing repairs, or simply spending time in the shop, the Comfort Zone heater ensures that the space remains comfortably warm. I also like that the temperature shuts off once it gets too hot so that I don’t have to worry about safety risks of the heater just running itself to unsafe temperature levels.
The temperature control features of this space heater are a standout aspect of its performance. The adjustable thermostat allows me to customize the temperature to my liking, ensuring that the shop is neither too hot nor too cold.
It was fairly easy to hard wire to my existing shop set up and screwed easily to the ceiling with the mount.
In conclusion, the Comfort Zone Electric Space Heater has proven to be a reliable and efficient solution for heating my shop. With its impressive heat output, customizable temperature control, ease of use, and safety features, it has become an indispensable tool for creating a comfortable workspace. I highly recommend this space heater to anyone seeking a practical and effective heating solution for their garage or similar spaces.
VULCAN –
Got mine installed and did not have the hinge rear to drop access to the wire hookup area. Simple install to the garage ceiling with a pilot hole for a 2″ long, 1/4 in width wood hex head with nice big flat washers to support the single center attachment point to the garage ceiling. Ezy pzy and plenty secure. I wanted to be able to turn the fan direction if wanted.
Ran 10 ga 2 wire with ground to it from the QUALITY dryer plug bought here at the Zon, and wired the unit. I set on heat level #2 and turned it on.
Excellent HOT heat coming out, and 12 feet away the fan is clearly doing it’s job. The fan power is fine, the heat is HOT just set on 2, and the only potential drawback for some is the thermostat is not as accurate in function as your whole house furnace is. Who cares?
Most are using this for a garage or shop, and some don’t want those to drop under freezing when unattended and unused. I set up a remote temp sensor and in a 12 x 25 ft garage, in Omaha NE and if you want to keep your garage above freezing, this unit can do that. Really, it can do that not working very hard.
I was thinking this was a big toy, might help a little or might not. I was wrong. This is a serious tool, well made, works, hot heat and fan plenty strong – and all at $109? Are you kidding me??
Can see other uses for this heater, too. This is NOT a toy, works, HOT heat, good fan, makes a bit of mild fan noise but WHO CARES? You sleeping in your garage?
I got the ex warranty so if this goes South I’m covered, but by any account this is a nice unit, works, built solidly and if you do your own wiring be SAFE and be SURE to use a GOOD dryer plug with a lot of surface contact to your 10 ga wire. Critical. Tight and solid good connections is important. Get your gas cans out of your garage and into the shed.
Read directions and adhere to them. They’re there for a reason. My garage ceiling is only 7″ but I attached this as high as I could right to the ceiling joists, center factory attachment point with big flat washers to help support.
VERY impressive heater at this price point!!! Nice. My only nitpick is they should have made the ground attachment point the same as the two positives, with easy secure attachment. I used the extra wide wire crimper tool to secure a yellow 10ga wire loop to the end of the ground wire, then attached that to the ground point on the unit where they supplied the hex head bolt attachment. Works fine. Just UN-necessary and their trying to maximize profit by saving a buck a copy. No bid deal. GOOD UNIT.
PS: The Zon 10 ga 2 wire and one ground wire pricing was way better than the big store big name hardware stores here!!
Mike –
Works very good heats my garage up enough to work in a sweat shirt in the winter
Martin –
CCC Comfort Zone, I was surprised by the quality of this product for such a low price. It is certainly of industrial quality. Before buying, I read all the reviews for this unit and one thing that came out a lot was that the unit often came with loose parts so before installing it I verified that all bolts and nuts were tight. Although mine seemed ok but didn’t want to take a chance.
This unit has a local thermostat but it is not very practical when the unit is 8 feet up. Therefore I bought an Aube RC840T-240 On/Off Switching Electric Heating Relay with Built-in 24 V that fit perfectly inside the unit so I could use my existing low voltage thermostat. I’ve been running it in my garage since the second week of September and it rocks 😉
Melsman –
This is a good heater for the money. Easy to install, simple circuitry, heating elements vs. spiral wire, SState thermostat, etc. The elements run about 350 degrees at 5000 watts, and the air flow at the face is around 8.5 mph. I use two of these units to heat a double insulated 2000 sq.ft. metal building with three roll-up doors. They can maintain a temperature difference of between 20 and 30 degrees, which is what I was hoping to accomplish with 34,000 btu’s of heat in a 35,000 cf building.
Note that this heater does NOT have a fan circuit that continues circulation when the thermostat cuts off. This is a good thing if you plan on using an external thermostat to cut the power as an off and on control. (Originally, I reported that the overheat circuit allowed the fan to run after shutting off the heating elements. However, that was incorrect. The overheat circuit interrupts power to the elements and the fan motor.)
As so many have mentioned here, the fan blades are usually loose when this heater arrives. If they aren’t, they will be. Just assume that you are going to need to treat this as a kit that you are going to have to rebuild. Of the two units I ordered, one spun the fan off within 10 hours of use. So I decided to re-build both. I found that the second one also had a loose fan nut, though it hadn’t yet loosened to the point of dropping off.
I also discovered that the unit that spun the fan off was missing a washer. There should be two washers; a notched washer behind the fan, and a standard washer in front of the fan. Mine was missing the standard flat washer. Of course, I didn’t know that until I onpened up and rebuilt the second one.
As one reviewer mentioned, the fans are not formed accurately, and you need to make sure that the blade edges are even and track properly. I also found one of the fan blades to be well out of balance. After adjusting the blade pitch and balancing the fans, I reassembled the fan and motor assembly using BLUE locktite, and then remounted everything, again using blue locktite all around.
As a final note, I just ordered a third unit to have as a back-up in case one of my units fail. Yes – I will rebuild this one without a second thought.
So, overall, this gets five stars for value and utility, minus one star for the fan being assembled poorly.
LATEST UPDATE: I purchased a fourth unit for use in my soon-to-be-built shop. I ‘reassembled’ my third unit and found that the fan was completely detached when new in box. This unit didn’t even include any of the fan washers! ( Yes – I searched the box and packing materials thoroughly.) Lucikily, the LHT nut and fan hub were in the unit, and I was able to find one suitable washer in my spare stuff, so I was able to get the heater rebuilt. As for the fourth unit, I found the fan assembly complete but the fan nut was barely finger tight. I easily removed the nut with no tools. I believe it would have spun off within a few hours of use (as one of my two original units did). However, all the parts were there, so I reassembled with blue locktite and all was good… until I found two broken rivets on the access door of the unit! So, two spare machine screws and nuts later, the unit was ready to use.
So, in summary, of the four units I received, the fan was completely off of one, the fan spun off of another, the third and fourth had loose fan nuts (with the fourth having two broken rivets as well).